Documents: Go to download!
User Manual
Table of contents
WARNING
Your hard floor cleaner assembles quickly and easily, no tools required.
WARNING: Do not plug in your hard floor cleaner until you are familiar with all instructions and operating procedures.
Insert the handle into the top of the body until you hear a click. Then insert the body into the foot until you hear the locking tab click.
WARNING: Exercise extreme care when using the hard fl oor cleaner on hardwood fl oors. Prolonged application of steam in one area increases the risk of damage to the surface treatment on timber floors. Test steam mop in an inconspicuous area before mopping a large area. The steam mop generates hot steam, so move the unit continuously when depressing the trigger. The trigger does not need to be depressed at all times. Regular foot traffic and direct sunlight will wear down timber floor surface treatment, making it more susceptible to steam damage. Check with your timber fl oor treatment and application specialist prior to steam mop operation.
Easy Touch Digital Controls
The fingertip power controls are located on the front of the handle. Settings include:
(HI) High Steam
Use for durable floors or on sticky messes. To turn steam on, press once. Click again to turn steam off. Can be used simultaneously with the vacuum function or separately as a steam mop only.
(LO) Low Steam Use on delicate floors or for light, everyday cleaning. To turn steam on, click once. Click again to turn steam off. Can be used simultaneously with the vacuum function or separately as a steam mop only.
NOTE: You must select a steam setting first and then hold down the hand trigger to produce steam.
(VAC) Vacuum ON/OFF switch. Can be used simultaneously with either steam function or separately as a stick vacuum only.
NOTE: All settings can be used alone or either steam setting can be used simultaneously with the vacuum setting.
Reusable microfiber mop pads are machine washable and safe for virtually all hard floor surfaces. The white microfiber pad is best for everyday use on delicate flooring like sealed hardwoods and laminate. The gray and white striped pad can be used for scrubbing heavily soiled floors and cleaning tougher messes.
WARNING: Appliance will not pick up crayons, marbles and other large objects.
Tip: Do not attempt to use your hard floor cleaner on the steam setting without water in the tank. You may hear a knocking sound indicating there is no water.
WARNING: Be sure to turn OFF vacuum mode if you encounter liquid on the floor
The mop pad may have already come attached to the mop pad tray on the foot of the unit. If not, please follow step 1 below.
For Microfiber Mop pads, please follow these steps:
1. Attach mop pad.
a. Step on foot release for mop pad tray and lift unit off tray.b. Some units may come with fragrance discs. Add fragrance disc in the mesh pocket in the mop pad. Use the whole disc for a refreshing scent or cut in half for a lighter scent.
c. Wrap mop pad around the bottom of the tray, making sure the gray stitching is in the front and the quick release tab is in the back.
d. Put the mop pad tray back down on the floor and set the unit back on top. It will click into place.
2. Fill the water tank.
a. On the back of the unit, open the Easy Fill opening of the water tank and use the included Water Cup to fill the water tank with water. Don’t overfill or water may spill from the tank. For best results, water should be at room temperature.
b. Close the Easy Fill opening.c. The water tank holds 13oz. and will last approximately 15 minutes depending on the amount of the steam used during cleaning.
3. Pull and twist the Quick Release cord wrap clockwise to unwrap the Power Cord completely and plug into an outlet as described on the Important Safety Instructions on page 2.
NOTE: Upon the first use or first use after refilling the water tank, the pump may make a ‘knocking’ sound. This is normal and could last up to 30 seconds.
WARNING: Tinted plates on foot may get hot while steam mop is in use. Do not touch while hot.
WARNING: Never put descaling, alcoholic or detergent products into the steam cleaner, as this may damage it or make it unsafe for use.
Tip: Use of distilled or demineralized water is recommended to prolong the life of your hard floor cleaner. To add a fresh scent as you clean, try BISSELL® demineralized waters in various scents like Citrus, Eucalyptus Mint and Spring Breeze.
The hard floor cleaner can be used as a vacuum and a steam mop at the same time or separately. For best results and time savings, use the powerful vacuum to clear floor of dust and small debris as you steam mop.
Your hard floor cleaner is designed to clean hard flooring, such as ceramic tile, marble, stone, and sealed hard wood floors. Use on waxed or some unwaxed floors may result in a diminished glossiness. The hard floor cleaner is not for use on unsealed wood floors. For best results, test in an inconspicuous area and check the care instructions from your flooring manufacturer.
1. Plug the unit in and wait 30 seconds for it to heat up. When the Steam Ready light illuminates, choose the level of steam to clean your floor:
HI for durable floors or sticky messes.
LO for delicate floors or every day cleaning.
2. Press Steam Trigger on the underside of the handle to actuate steam
3. Push the VAC switch down to turn ON the cyclonic vacuum.
4. Begin cleaning by slowly moving the unit over the floor surface while pressing the Steam Trigger on the underside of the handle. Moisture on the floor is normal when using in steam mode.
5. When the hard floor cleaner stops emitting steam, turn the unit OFF (both steam mop and vacuum functions) and unplug. Open the Easy Fill opening of the water tank and use the Water Cup to add more water to the tank. For best results, water should be at room temperature. Then close the Easy Fill opening, turn the unit back on and continue cleaning.
NOTE: To be sure to sanitize an area of your floor, use the microfiber cloth pads and slowly and evenly stroke the hard floor cleaner back and forth at least three times over the area using continuous steam. For best results, remove the pad and wash after use.
WARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
Tip: For vacuum use on low pile area rugs, remove pad tray for improved performance.
An internal thermal protector has been designed into your vacuum to protect it from overheating. When the thermal protector activates, the vacuum motor will stop operating. If this happens:
WARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
CAUTION: Upright storage of the cleaner with a wet mop pad may result in the formation of white marks on your floor. To remove the white marks, clean area with vinegar.
The Dirt Tank needs to be emptied when the dirt reaches the ‘Full’ line on the side of the tank.
NOTE: The Dirt Tank may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing.
The key to maximum performance is having clean filters. Cleaning the filters after each use will help the vacuum operate at peak efficiency. Use only genuine BISSELL® replacement filters in your hard floor cleaner. To purchase, visit web BISSELL or call BISSELL Consumer are at 1-800-237-7691.
1. To clean the foot and bristles, push the release button on the back of the pivot joint and pull the foot to release it from the appliance.
2. Wash bottom of foot and bristles with cold water.
3. Look for any clogging in the steam nozzle. To clean, run water over steam nozzle.
NOTE: Make sure foot and bristles are dry before attaching the foot to the appliance.
4. To re-attach the foot to the appliance: place the foot on the floor, push the appliance down into the foot and then listen for the click that sounds when properly attached.
WARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
WARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.
Dirt Tank is full
Dirt Tank is not installed properly
Filters need cleaning
Filters need replacing
Hose tube is not installed properly
Dirt Tank is full of debris
Filter is missing or installed incorrectly
Dirt Tank installed incorrectly
Water tank empty
Steam level not selected
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL® Consumer Care by E-mail or telephone as described below.
It may be necessary to obtain some of your personal information, such as a mailing address, to fulfill terms of this warranty. Any personal data will be handled pursuant to BISSELL’s Privacy Policy, which can be found online at BISSELL
Subject to the *Exceptions and Exclusions from the Terms of the Limited Warranty, upon receipt of the product BISSELL will repair or replace (with new, refurbished, lightly used, or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for two years, any defective or malfunctioning part.
See information below on "If your BISSELL product should require service”.
This warranty applies to product used for personal, and not commercial or rental, service. This warranty does not apply to fans or routine maintenance components such as filters, belts or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the user guide is not covered. This warranty will only be valid if the product is used in the same country in which it was sold.
BISSELL is not liable for incidental or consequential damages of any nature associated with the use of this product. BISSELL’s liability will not exceed the purchase price of the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is exclusive and in lieu of any other warranties, either oral or written. Any implied warranties, which may arise by operation of law, including the implied warranties of merchantability and fitness for a particular purpose, are limited to the two- year duration from the date of purchase as described above.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.
Please do not return this product to the store.
Other maintenance or service not included in the manual should be performed by an authorized service representative.
If your BISSELL® product should require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.
Bissell 2747A | Series: 2747 | Pages: 12 | Created on: 2019-05-01 | File type: PDF | Filename: 13380133_2747a.pdf | Size: 1.11 MB | Language: English
